How good would this Tiki Vinyl Decal look on your car window? On a mirror in your bedroom?
Don't hesitate - snap it up!
Featuring a one imposing tiki!
Measures 13.5cm wide and 15.5 cm high at largest points (approximately).
VINYL DECAL APPLICATION INSTRUCTIONS
What can I do with decals? Vinyl Decals stick to almost all flat surfaces. Walls, Car Windows, Laptops, Fridge etc.
These are die cut decals, meaning there is no background.
The background colour will be the surface you put the decal on. If it is a window, the background will be clear.
Vinyl decals come in 4 pieces. 1. Top layer is a transparent tape (holds your decal or sticker together until it is applied).
2. Middle layer is your actual decal or sticker (it is sandwiched between the application tape and the wax backing)
3. Bottom layer is the wax backing (protects the adhesive until the decal is ready to be applied)
4. Do not wash for 24 hours
To apply: Step 1
Clean area well with rubbing alcohol or soap and water.
Do not use Windex or similar products as it will leave a residue behind which will stop the sticker from adhering well.
Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to transfer tape.
Peel the white backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat step 2.
Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. Start in the middle and work your way out.
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If the sticker peels away from the surface repeat step 4.
There are heaps of how-to-apply car decal videos on you tube. For example: https://www.youtube.com/watch?v=NmS9XtpkX3w (NB - We take no responsibility for any instructions you follow and stuff up!)